Rammed earth

Rammed earth wall - Rammed earth

Rammed earth home - interiorRammed earth, also known as taipa in Portuguese, tapial in Spanish or pisé de terre or simply pisé in French, is a technique used to build walls with earth, chalk, lime and gravel. It’s an ancient building method that has seen a revival in recent years as people seek more sustainable building materials and natural building methods. Rammed earth walls are simple to construct, incombustible, thermally massive, very strong and durable. Conversely, they can be labour-intensive to construct without machinery (powered rammers), and if improperly protected or maintained they are susceptible to water damage. Traditionally, rammed earth buildings are found on every continent except Antarctica. From temperate and wet regions of north Europe to semi-dry deserts, mountain areas and the tropics. The availability of useful soil and building design for the local climatic conditions are factors favouring its use.

Overview of use

Building a rammed earth wall involves compressing a damp mixture of earth that has suitable proportions of sand, gravel and clay (sometimes with an added stabilizer) into an externally supported frame, creating a solid wall of earth. Historically, stabilizers such as lime or animal blood were used to stabilize the material, while modern rammed earth construction uses lime, cement or asphalt emulsions. Some modern builders also add coloured oxides or other items such as bottles or pieces of timber to add variety to the structure.

A temporary frame (formwork) is first built, usually out of wood or plywood, to act as a mould for desired shape and dimensions of each wall section. The frames must be sturdy and well braced, and the two opposing wall faces clamped together, to prevent bulging or deformation from the high compression forces involved. Damp material is poured into a depth of between 100 to 250 mm, and compressed to around 50 per cent of its original height. The compression of material is done iteratively in batches, to gradually build up the wall to the required height, dictated by the top of the frame. Historically, compression was done by hand with a long ramming pole, and was very labour-intensive, but today’s modern construction employs pneumatically powered tampers, which is much more efficient.

Once complete, the wall is strong enough that the frames can be immediately removed. This is necessary if a surface texture (e.g. by wire brushing) is desired, since walls become too hard to work after about an hour. The walls are best constructed in warm weather so that they can dry and harden. Walls take some time to dry out completely, and may take up to two years to completely cure. Compression strength increases with increased curing time, and exposed walls should be sealed to prevent water damage.

In modern variations of the method, rammed earth walls are constructed on top of conventional footings or a reinforced concrete slab base.

Features and benefits

The compression strength of rammed earth can be up to 4.3 MPa. This is less than the value of a similar thickness of concrete, but more than strong enough for use in domestic buildings. Indeed, properly built rammed earth can withstand loads for thousands of years, as many still-standing ancient rammed earth structures around the world attest. Rammed earth using rebar, wood or bamboo reinforcement can prevent failure caused by earthquakes or heavy storms. Mixing cement with the soil mixture can also increase the structure’s load bearing capacity but can only be used in clay-poor mixtures. The USDA observed that rammed earth structures last indefinitely and could be built for no more than two-thirds the cost of standard frame houses.

Soil is a locally available, low cost and sustainable resource, and harvesting it for use in construction has minimal environmental impact. This makes rammed earth construction highly affordable and viable for low-income builders. Unskilled labour (often friends and family) are able to provide most of the necessary labour, and today more than 30 per cent of the world’s population uses earth as a building material.

While the cost of material is low, constructing rammed earth without mechanical tools can be a very time consuming project; however with a mechanical tamper and prefabricated formwork it can take as little as two to three days to construct the walls for a 2000 to 2200 ft2 house.

One of the significant benefits of rammed earth is its excellent thermal mass; like brick or concrete construction, it can absorb heat during the day and release it at night. This can even out daily temperature variations and reduce the need for air conditioning and heating. But, rammed earth, also like brick and concrete, often requires insulation in colder climates. It must also be protected from heavy rain and insulated with vapour barriers.

When finished and without paint or other finish, the walls have the colour and texture of natural earth. Blemishes can also be patched up using the soil mixture as a plaster and sanded smooth. Care needs to be taken to avoid moisture-impermeable finishes such as cement render, as these will impair the ability of the wall to desorb (rid itself of) moisture, leading to a loss of compressive strength.

The thickness and density of rammed earth walls, typically 300 to 350mm thick, lends itself naturally to soundproofing. Rammed earth walls are also termite-resistant, non-toxic, inherently fireproof and ultimately biodegradable.

The material mass and clay content of rammed earth allows the building to “breathe” more than concrete structures, avoiding condensation issues without significant heat loss.

Nails or screws can be driven easily into well-cured walls, and they can be effectively patched with the same material used to build them.

What makes it sustainable?

Because rammed earth structures use locally available materials, they typically have low embodied energy and generate very little waste. The soils used are generally subsoils low in clay, between 5 per cent and 15 per cent with the topsoil retained for agricultural use. Ideally, the soil removed to prepare the building foundation can be used, further reducing cost and energy used for transportation.

Rammed earth buildings reduce the need for lumber because the formwork used is removable and can be continually reused.

Rammed earth can effectively control humidity where unclad walls containing clay are exposed to an internal space. Humidity is held between 40 per cent and 60 per cent which is the ideal humidity range for asthma sufferers and the storage of susceptible items, such as books.

When cement is used in the earth mixture, sustainable benefits such as low embodied energy and humidity control will not be realized. Manufacture of the cement itself adds to the global carbon dioxide burden at a rate of 1.25 tonnes per tonne of cement produced. Partial substitution of cement with alternatives such as ground granulated blast furnace slag hasn’t been proven effective and brings other sustainability questions with it.

Rammed earth can contribute to the overall energy efficiency of buildings. The density, thickness and thermal conductivity of rammed earth makes it a particularly suitable material for passive solar heating. Warmth takes almost 12 hours to work its way through a 350mm thick wall.

Rammed earth housing has been shown to resolve problems with homelessness caused by otherwise high building costs, as well as to help address the ecological dilemma of deforestation and toxic building materials associated with conventional construction methods.


Rammed earth has been used around the world in a wide range of climatic conditions, from wet northern Europe to dry regions in Africa. And it has been used for a long time.

Evidence of the early use of rammed earth has been seen in Neolithic archaeological sites of the Yangshao and Longshan in China along the Yellow River, dating back to 5000 BCE. By 2000 BCE, the use of rammed earth architectural techniques was commonly used for walls and foundations in China. The Great Wall of China used the “hang tu”-method which utilized layers of 10-15 cm loose earth (between formwork), which was then rammed with poles. Thickness: up to 10.6 m (which is much thicker than what is optimal).

In the 1800s in the United States, rammed earth was popularized by a book Rural Economy by S. W. Johnson. It was used to construct Borough House Plantation and Church of the Holy Cross in South Carolina, which are two National Historic Landmarks of the United States:

“Constructed in 1821, the Borough House Plantation complex contains the oldest and largest collection of ‘high style’ pise de terre (rammed earth) buildings in the United States. Six of the 27 dependencies and portions of the main house were constructed using this ancient technique, which was introduced to this country in 1806 through the book Rural Economy, by S.W. Johnson.” An outstanding example of rammed earth construction in Canada is St. Thomas Anglican Church (Shanty Bay, Ontario) built between 1838 and 1841.

The 1920s through the 1940s was an active research period for rammed earth construction in the U.S. South Dakota State College carried out extensive research and built almost 100 weathering walls of rammed earth. Over a period of thirty years the college researched the use of paints and plasters in relation to colloids in soil. In 1945 Clemson Agricultural College of South Carolina published their results on rammed earth research in a pamphlet called “Rammed Earth Building Construction.” In 1936 on a homestead near Gardendale, Alabama, the United States Department of Agriculture constructed an experimental community of rammed earth buildings with architect Thomas Hibben. The houses were built inexpensively and sold to the public, along with land sufficient for a garden and small livestock plots. The project was a success and provided valuable homes to low-income families.

USAID is working with undeveloped countries to improve the building science around rammed earth houses. They also financed the writing of the “Handbook of Rammed Earth” by Texas A&M University and the Texas Transportation Institute. The handbook was never available for purchase by the public until the Rammed Earth Institute International gained permission to reprint it.

Interest in rammed earth fell after World War II when the prices of modern building materials dropped. Rammed earth began to be viewed as substandard, and today it often meets opposition from contractors, engineers and tradesmen who are unfamiliar with earth construction techniques.

[ background=”#b6c4b3″ color=”#000000″ border=”0px solid #cccccc” shadow=”0px 0px 0px #eeeeee”]This article originally appeared on Appropedia.[/]

image 1: Wikimedia Commons; images: Lsbentz (Creative Commons BY-NC-ND)

Written By
More from editor
Reviving a neighbourhood by building affordable sustainable housing
Massachusetts Avenue Park was not a place you’d want to take your...
Read More
Leave a comment

Your email address will not be published.